Energy monitoring and baselining

See every kWh, zone by zone, and prove the savings

Live consumption for the whole site and every zone, a fair baseline to measure against, and savings verified in kWh, cost and CO₂.

Book a demo → See the dashboard

Zone-wise monitoringAI-adjusted baselinesVerified savings

Zone-wise consumption vs baseline This month

Floor 1

−20%

Floor 2

−14%

Floor 3

−18%

Lobby

−9%

Data room

+4%

Car park

−22%

Consumption412 MWh

Baseline486 MWh

Saved15.2%

BaselineBelow baselineAbove baseline

How it works

Measure, baseline, prove

1 · Monitor

Live consumption everywhere

Energy meters feed live kW and kWh for the building, every floor and every zone.

2 · Baseline

A fair reference point

Overall and zone-wise baselines, adjusted by AI for weather, occupancy and operating hours.

3 · Prove

Savings you can defend

Verified savings = baseline − actual, in kWh, cost and CO₂, in line with IPMVP Option C.

4 · Drill down

Find the cause fast

From site to zone to individual equipment, so every spike points to a unit.

The energy dashboard

From the whole site to a single unit in two clicks

Tower A · today Click a zone

ZoneTodayvs baseline

412 kWh−18%

AHU-03208 kWh−21%Lighting96 kWh−24%Plug load108 kWh−6%

286 kWh−9%

AHU-01171 kWh−11%Lighting72 kWh−8%Plug load43 kWh−2%

655 kWh+4%

CRAC-01402 kWh+7%UPS losses118 kWh+1%IT load135 kWh0%

138 kWh−22%

Exhaust fans94 kWh−26%Lighting44 kWh−13%

Illustrative data. Replace with real screenshots before launch.

Verified savings · this week AI baseline

AI baselineActualVerified savings

Saved41.2 MWhthis month

Cost saved₹3.3 Lat ₹8 / kWh

CO₂ avoided33.8 t0.82 t / MWh

What we measure

Meters, data and indicators

NSP installs the meters where you don't have them, then reads everything through NSP Envision Edge.

Zone energy meters · kW, kWh, V, A, PFChiller plant · kW/TR, chilled-water ΔTWater and chilled-water flow metersPeak demand · kWEnergy intensity · kWh/m²Weather, occupancy, tariff

What you get

Reports that answer the question

Daily and monthly dashboards for energy and savings by zone
Budget vs forecast tracking, with peak-demand alerts before the peak
Energy anomalies when a zone draws power at night or steps up suddenly
ESG-ready reports with CO₂ avoided and energy-intensity trends

FAQ

Energy questions, answered

How is the baseline calculated?

From your pre-optimisation data for the whole site and each zone. The AI adjusts it for weather, occupancy and operating hours, so savings aren't just a mild month.

Do we need new meters?

Only where zones aren't metered today. NSP supplies, installs and commissions energy and flow meters, then connects them with your existing ones.

How are savings verified?

Verified savings are the AI baseline minus actual consumption, reported per zone and per measure in kWh, cost and CO₂, following IPMVP Option C whole-building principles.

Can we see individual equipment?

Yes. Drill down from site to zone to equipment such as AHUs, chillers, lighting and plug loads, wherever sub-meters or equipment data are available.

Book a demo

See your building's baseline

We'll show where a building like yours is losing energy, zone by zone.

Book a demo → Back to NSP Envision iBMS